© Copyright 2025 by Weldind Solutions Pvt Ltd. Design by : Delicious Web Pvt Ltd.
Preloader Close
- [email protected]
- +91 731 119 4000
- Taloja Phase II, Navi Mumbai Maharashtra-410208 India
Industry
- E7015: The product is applicable for welding carbon steel and low alloy steel structures (under pressure and dynamic load), such as 16Mn, 09Mn2Si, 09Mn2V and A, B, D and E grade steels for ships.
- F9A4-EG-G: Working with proper welding wire (such as JQ·H08MnMoTiB), the product is applicable for welding base metal with tensile strength of 620MPa, such as X70, X80. It is mainly used in pipeline industry.
- F6A0-EM8: Working with proper welding wire (such as JQ·H08A), applicable for welding base metal with tensile strength of 430MPa, such as Q235 and Q345. It is commonly used in the fields such as pipelines and steel structure.
- EL8: Working with sintered fluxes JQ·SJ301 and JQ·SJ501, it is suitable for welding base metal with tensile strength of 430MPa. It is commonly used in the fields such as ships, pressure vessels, bridges, construction machinery, construction machinery, steel structures and so on.
- E7015: The product is applicable for the welding of Q345R (HIC) hydrogen-resistant steel plates, such as crude oil distillation, coking and cracking units such as primary distillation tower, flash tower, atmospheric tower, vacuum tower, splitter tower, stabilizer tower and stripping tower.
- E7016 : The product is applicable for the groove bottom backing weld of carbon steel and low alloy steel pipes and butt joints.
- 235R(HIC): The product is applicable for the welding of Q235R(HIC) and 20#(HIC) hydrogen-resistant steel plates, such as crude oil distillation, coking and cracking units such as primary distillation tower, flash tower, atmospheric tower, vacuum tower, splitter tower, stabilizer tower and stripping tower.
- J427(J48•47): The product is applicable for welding low carbon steel and low alloy steel structures with tensile strength of 430MPa, such as buildings, bridges, pipelines, pressure vessels, etc.
- E6010: ISO 2560-A-E 38 3 C 21
- E6010 : The product is applicable for girth butt joint of various carbon steel pipes and vertical down welding of general carbon steel structures.
- E10018-G : The product is applicable for the welding of X80 pipeline steel and low alloy steel with corresponding strength grade.
- E9015-G: The product is applicable for welding high-strength steel oil storage tanks with tensile strength of 600MPa.
- E9015-G: The product is applicable for the welding work of important structures such as pressure vessels, bridges, downcomers of hydropower stations and ocean engineering, such as CF60(62) steel.
- E8015-G: The product is applicable for the welding of X65 pipeline steel and low alloy steel with corresponding strength grade.
- E8015-G: The product is applicable for welding important structures of low alloy steel such as pressure vessels, marine engineering, bridges and ships.
- E7010-P1: The product is applicable for girth butt joint of carbon steel and low alloy steel pipes with the same strength grade, and vertical down welding work of general carbon steel structures.
- E7015-G: The product is applicable for the welding of X60 pipeline steel and low alloy steel with corresponding strength grade.
- JQ·H08MnNiTiB(H08D): When working with sintered flux JQ·SJ102G, it is applicable for welding base metal with tensile strength of 540MPa. It mainly used in the pipeline industry.
- JQ·MH50CG: When working with sintered flux JQ·SJ101G, it is applicable for welding base metal with tensile strength of 490MPa. It mainly used in the oil storage tank industry.
- E70C-6M: The product is applicable for welding API X70 pipeline steel or 490MPa tensile strength structural steel, mainly used for root welding, filling and cosmetic welding of X70 pipeline steel. It is mainly applied in the fields such as long-distance pipelines, automobile manufacturing, ocean engineering, construction machinery and so on.
- E80C-Ni1: The product is applicable for welding API X80 pipeline steel or 550MPa tensile strength structural steel, mainly used for root welding, filling and cosmetic welding of X80 pipeline steel. It is mainly applied in the fields such as long-distance pipelines, automobile manufacturing, ocean engineering, construction machinery and so on.
- JQ·MH60CG: Working with sintered flux JQ·SJ101H, the product is applicable for welding base metal with tensile strength of 620MPa, such as 12MnNiVR. It is mainly used in oil storage tanks.
- E81T1-K6M: The product is applicable for welding API X65, X70 pipeline steel or 550MPa tensile strength structural steel. It is mainly used in the fields of long-distance pipeline, offshore engineering, construction machinery, etc.
- ER80S-Ni1: The product is applicable for welding low-temperature steel (-45℃) with tensile strength of 550MPa. It is mainly used in the fields such as petrochemical industry (fertilizer, ethylene, coal liquefaction, liquefied petroleum gas, etc.), refrigeration equipment, food industry and liquid gas storage equipment.
- JQ·H08MnMoTiB(H08C) : When working with sintered flux JQ·SJ101G, it is applicable for welding base metal with tensile strength of 620MPa. It mainly used in the pipeline industry.
- E71T5-GC : The product is applicable for welding pipeline steel below API X65 or structural steel with tensile strength of 490MPa, and can realize semi-automatic and full-automatic welding of pipelines in all positions. It is mainly used in the fields such as long-distance pipelines and marine engineering.
- E81T5-GC : The product is applicable for welding pipeline steel of API X65, X70 or structural steel with tensile strength of 550MPa and can realize semi-automatic and full-automatic welding of pipelines in all positions. It is mainly used in the fields such as long-distance pipelines and marine engineering.
- EG70T-2: The product is applicable for gas-electric vertical welding of structural steel with a tensile strength of 490MPa, mainly applied in the fields such as storage tanks, ships, bridges, blast furnaces and so on.
- E71T8-Ni1-J: The product is applicable for welding API X52 -X70 pipeline steel or structural steel with tensile strength of 490MPa, such as L485(X70) and L450(X65), It is especially suitable for field welding under complex working conditions. It is mainly used in the fields such as long-distance pipelines, marine engineering and bridges etc..
- E81T8-G: The product is applicable for welding API X65 -X80 pipeline steel or structural steel with tensile strength of 550MPa, such as L555(X80) and L485(X70), It is especially suitable for field welding under complex working conditions. It is mainly used in the fields such as long-distance pipelines, marine engineering and bridges etc..
- E91T1-K2M: The product is applicable for welding API X80 pipeline steel or 620MPa tensile strength structural steel. It is mainly applied in the fields such as long-distance pipelines, ocean engineering, construction machinery and so on.
- E91T5-GC: The product is applicable for welding pipeline steel of API X80 or structural steel with tensile strength of 620MPa, and can realize semi-automatic and full-automatic welding of pipelines in all positions. It is mainly used in the fields such as long-distance pipelines and marine engineering.
- JQ·YJL60G: The product is applicable for gas-electric vertical welding of structural steel with a tensile strength of 610MPa, mainly applied in the fields such as storage tanks, ships, bridges, blast furnaces and so on.
- E91T8-G: The product is applicable for welding API X80 -X90 pipeline steel or structural steel with tensile strength of 620MPa. It is especially suitable for field welding under complex working conditions. It is mainly used in the fields such as long-distance pipelines, marine engineering and bridges etc..
- ER70S-6 : The product is applicable for welding various carbon steel and low alloy steel with 490MPa tensile strength grade, commonly applied in the fields such as bridges, buildings, automobile manufacturing, mechanical structures, etc..
- ER70S-G: The product is applicable for welding hydrogen-resistant steel with 500MPa tensile strength. It is mainly applied in the fields such as petrochemical industry, oil pipeline and so on.
- ER70S-6: The product is applicable for welding various carbon steel and low alloy steel with 490MPa tensile strength grade, commonly applied in the fields such as bridges, buildings, automobile manufacturing, mechanical structures, etc..
- ER70S-G : The product is applicable for welding X65 and X70 pipeline steel, mainly applied in the field of long-distance pipelines.
- ER80S-G: The product is applicable for welding X80 pipeline steel, mainly applied in the field of long-distance pipelines.
- JQ·SJ101H: Working with proper welding wires (such as JQ·MH50CG and JQ·MH60CG), the product is applicable for welding base metal with tensile strength of 490MPa and 620MPa.It is mainly used in oil storage tanks.
- ER70S-6 : The product is applicable for welding various carbon steel and low alloy steel with 490MPa tensile strength grade, commonly applied in the fields such as bridges, buildings, automobile manufacturing, mechanical structures, etc..